Download  Print this page

Panasonic AJ-LT85P Operating Instructions Manual page 27

Panasonic vqt7628 digital video cassette lap top editor operating instructions
Hide thumbs

Advertisement

DETAILED DESCRIPTION OF SET-UP MENUS
EDIT
Item
No.
Item
No.
300
SERVO
0000
REF
0001
301
PLAY
0000
DELAY
0004
0015
302
AUD EDIT
0000
IN
0001
303
AUD EDIT
0000
OUT
0001
304
BEEP
0000
0001
0002
0003
305
AUTO
0000
ENTRY
0001
0002
306
SV-UNLK
0000
EDIT
0001
0002
The underlined number and item are the factory settings.
*The EXT setting can be performed only for VTR2.
Setting
Item
AUTO
This selects the signal with which the servo is synchronized.
0: During recording or editing, the servo is synchronized with the input signal;
EXT*
during playback, it is synchronized with the REF signal.
1: The servo is synchronized with the REF signal at all times.
This sets the PLAY delay time in 1-frame increments.
0 (VTR1)
<Note>
When VTR1 or VTR2 is connected to the external unit and controlled from
4 (VTR2)
external source, set the PLAY DELAY setting value in accordance with the
system connection.
15
This selects how the audio edit IN point is to be linked.
CUT
0: Cut processing
FADE
1: Fade processing
CUT
This selects how the audio edit OUT point is to be linked.
0: Cut processing
FADE
1: Fade processing
OFF
This sets whether a confirmation beep is to be output.
0: No beep is output.
ENTRY
ALL 1
1: A beep is output with entries, errors and warnings.
2: A beep is output with entries, errors and warning and when an edit IN or
ALL 2
OUT point is passed.
3: A confirmation beep is emitted when an ENTRY or EDIT IN point is passed
and when an error or warning has occurred. It is not emitted when an EDIT
OUT point is passed.
This sets whether the value of the previous edit OUT point is to be registered
OFF
REC
automatically as the next edit IN point after automatic editing.
0: Value is not automatically set.
ALL
1: Value is automatically set for VTR2 only.
2: Value is automatically set for both VTR1 and VTR2.
EDIT
This selects whether editing is to be suspended when servo lock fails to be
engaged.
ABORT1
ABORT2
0: Editing is executed rather than suspended.
1: Editing is suspended when the servo fails to be engaged during the editing
approach section.
2: Editing is suspended when the servo fails to be engaged during the editing
approach section or after entry into the editing/recording section.
Description of setting
27
V
V
T
T
R
R
1
2
™ ™
™ ™

Advertisement

loading

  Also See for Panasonic AJ-LT85P

  Related Manuals for Panasonic AJ-LT85P