Basic Operations; Turning The Power On And Off; Using The Lcd Monitor - Panasonic P2HD AG-HPG20 Operating Instructions Manual

Basic operations

Turning the power on and off

Hold down [POWER] for at least 1 second.
• The power display LED lights, and the power is turned on.
• When [POWER] has been held down for more than 2 seconds while the power is on, the power display
LED will go off, and the power will be turned off.

Using the LCD monitor

1
Hold down [POWER] for at least 1 second to turn the power on.

Raise the LCD monitor while pressing the LCD monitor open button in the direction shown by
the arrow.
AG -HP G2
0

Set the LCD screen to the angle where it is easiest to see its displays.
10º
AG -HP G2
0
Make sure that the LCD monitor is raised upright before turning it.
REC
POWER
COUNTER
SET
THUMBNAIL
/MODE
MENU/MODE CHK
PAGE / AUDIO MON / VAR

LCD monitor screen
Turn the LCD monitor
screen 180 degrees
counterclockwise so that
it is facing the front.
• The monitor cannot
be turned more than
180 degrees. Applying
excessive force beyond
this limit may cause
damage the unit.
Once the LCD monitor
screen is positioned to
face the front, it cannot
be turned any further
RESET
USER
in the counterclockwise
1
EXIT/2
ALT/3
direction.
• Applying excessive
force beyond this limit
may cause damage
the unit.
AG -HP G2
0
AG -HP G2
0
Function buttons
LCD monitor screen
0º
In the clockwise
direction, the screen
can be turned up to 90
degrees.
• The monitor cannot
be turned more than
90 degrees. Applying
excessive force beyond
this limit may cause
damage the unit.
10º
The LCD monitor screen
will not tilt more than
120 degrees toward the
function buttons.
• Applying excessive
force beyond this limit
may cause damage
the unit.