Panasonic AJ-LT85P Operating Instructions Manual page 32

Panasonic vqt7628 digital video cassette lap top editor operating instructions
Hide thumbs Also See for AJ-LT85P:
Table of Contents

Advertisement

DETAILED DESCRIPTION OF SET-UP MENUS
VIDEO
Item
No.
Item
No.
600
INPUT C
0000
KILL
0001
601
OUT
0000
VSYNC
0001
602
V-MUTE
0000
SEL
0001
603
CC (F1)
0000
BLANK
0001
604
CC (F2)
0000
BLANK
0001
605
FREEZE
0000
SEL
0001
606
IN FRM
0000
DET
0001
607
VIN SETUP
0000
0001
608
VOUT SETUP
0000
0001
The underlined number and item are the factory settings.
Setting
Item
This selects the color killer processing for the video input signals.
B/W
AUTO
0: B/W processing is conducted forcibly.
1: Automatic processing is conducted.
N-VF
This selects whether the internal sync signal is to be floated so that H is
VF
aligned with the video output signal and V is aligned with the video input sig-
nal during EE.
0: Internal sync signal is not floated.
1: Internal sync signal is floated.
N-MUTE
This selects where the video signals are to be muted during playback under
LOW_RF
low RF conditions or when the servo lock is disengaged.
0: Signals are not muted.
1: Signals are muted.
BLANK
This selects ON or OFF for the closed caption signal in the first field.
THRU
0: Signal is forcibly blanked.
1: Signal is not blanked.
BLANK
This selects ON or OFF for the closed caption signal in the second field.
THRU
0: Signal is forcibly blanked.
1: Signal is not blanked.
FIELD
This selects freeze for the still picture either during play or when operation is
FRAME
transferred from play to stop.
0: Field freeze
1: Frame freeze
(Field freeze is set at all times when the laptop is in a mode other than the
one mentioned above.)
FORCE
This selects frame detection for the input signals.
AUTO
0: Frame detection is conducted at all times.
1: Frame detection is prohibited only with NON-STD signals.
THRU
This selects the 7.5% setup processing for the input composite signal.
CUT
0: The signal is recorded in its original form.
1: The signal is recorded with the 7.5% setup removed.
THRU
This selects the 7.5% setup processing for the output composite signal.
ADD
0: The signal is output in its original form.
1: The signal is output with the 7.5% setup added.
Description of setting
32
V
V
T
T
R
R
1
2
™ ™
™ ™
™ ™
™ ™
™ ™
™ ™
™ ™
™ ™

Advertisement

Table of Contents
loading

Table of Contents