Download  Print this page

Panasonic AJ-LT85P Operating Instructions Manual page 55

Panasonic vqt7628 digital video cassette lap top editor operating instructions
Hide thumbs

Advertisement

<Reference>
External device settings and communication methods
The external device settings and data communication method differ from one device to another. For details on the settings and
operations, refer to the manuals accompanying the selected device, its operating system (DOS) and communications program
or make inquiries with the manufacturer of the device connected.
1) Ensure that the communication protocol matches the external device settings
This unit's communication protocol can be changed using the set-up menu RS-232C PROTOCOL item.
[Default settings (factory settings): 9600 bps baud rate, 8-bit data length, 1-bit stop bit, and odd parity]
The external device settings are changed using the switches and MODE and SPEED commands in the RS-232C protocol
setting program.
[Setting example 1] MODE COM1: BAUD = 9600, PARITY = 0, DATA = 8, STOP = 1
[Setting example 2] SPEED RS232C-0 9600 BITS-8 PARITY-ODD STOP-1 NONE
If the changes cannot be made for the external device, ensure that settings of this unit correspond with those of the external
device.
Check that EDL is set for the set-up menu item No.202 (OPTION MODE).
Set set-up item No.208 (EDL FORMAT) to the input/output format.
AJ-LT85
No.
Signal
1
DCD
2
RD
3
TD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
- -
Format selection (common to DUMP and LOAD)
Set-up menu item No.
208
Communications parameter settings
Set-up menu item No.
203
204
205
206
207
<Notes>
• The reel number is fixed at 0001.
• GPI, wipe and other functions not featured by this unit are ignored.
2) To receive data using the RS-232C connector of an external device
Input COPY AUX_/A or COPYA AUX_ (where "_" represents the filename), and press the DUMP (SHIFT + A1) button. This
method can be used with most computers to receive data.
3) To send data from the RS-232C connector of an external device
While holding down the LOAD (SHIFT + A2) button, input COPY _/B AUX or COPYA_AUX (where "_" represents the file-
name). This method can be used with most computers to send data.
D-Sub9P
No.
Signal
1
DCD
2
RD
3
TD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
--
(Interlink cable specifications)
Item
EDL FORMAT
Selected from AG-A850 or CMX340
Item
BAUD RATE
1200/2400/4800/9600/19200
DATA LENGTH
7/8
STOP BIT
1/2
PARITY
NON/ODD/EVEN
FLOW CONTROL
NONE/RTSCTS
Setting item
Setting item
55

Advertisement

loading

  Also See for Panasonic AJ-LT85P

  Related Manuals for Panasonic AJ-LT85P