SPECIFICATIONS
GENERAL
Rating input: DC 12V 8.5A
Recording format:
Recording tracks
Tape speed:
Recording time:
Tape used:
FF/REW time:
Editing accuracy:
Tape timer accuracy:
Servo lock time:
Ambient operating temperature:
Ambient operating humidity:
Dimensions:
Weight:
VIDEO
DIGITAL
Sampling frequency:
Quantization:
Error correction:
ANALOG COMPOSITE IN/OUT
Video band range:
DG:
DP:
Y/C delay:
K factor:
Analog composite input:
REF video input:
Analog composite output:
Monitor output:
ANALOG COMPONENT OUT
Video band:
Analog component output:
VIDEO OUTPUT SIGNAL
Video gain:
Chroma gain:
Hue:
Set up:
H phase:
SC phase (COARSE):
SC phase (FINE):
DVCPRO
Digital video
Time code;
Recorded in sub-code area
Digital audio;
2 channels
Cue signal;
1 track
Control (CTL);
1 track
33.820 mm/sec.
126 min. (with AJ-P126LP tape)
66 min. (with AJ-P66MP tape)
1/4" thin magnetic layer metal tape
Less than 3.5 min. (with AJ-P126LP tape)
0 frame (with time code)
2 frame (per event when continuous CTL signal is used)
Less than 0.5 sec.
41 F to 104 F (5 C to 40 C)
10% to 85% (no condensation)
16-3/4" (W)×4-3/4" (H)×17-1/4" (D) (424×120×435 mm)
25.74 lb (11.7 kg)
Y; 13.5 MHz,
P
/P
; 3.375 MHz
B
R
8 bits
Reed-Solomon codes
Y; 30 Hz – 4.5 MHz ( 1dB)
Less than 6%
Less than 4.5
Less than 20 nsec
Less than 2%
BNC×2 (VTR1, VTR2), 75 ohms
BNC×2 (loop-through), 75 ohms, automatic
BNC×2 (VTR1, VTR2), 75 ohms
BNC×2 (VTR1, VTR2), 75 ohms, superimpose ON/OFF
(during playback of standard recording tape)
Y; 30 Hz – 5.5 MHz ( 1 dB)
P
, P
; 30 Hz – 1.3 MHz ( 1.5 dB)
B
R
BNC×6 (Y, P
, P
, VTR1, VTR2), 75 ohms
B
R
Y connector is switched with the analog composite
output connector.
More than 3dB
More than 3dB
More than 25
10 IRE
More than 1.5 sec
360
90
74