DETAILED DESCRIPTION OF SET-UP MENUS
ALL STOP SEL
The underlined number and item are the factory settings.
This selects whether condensation is to be ignored when it has formed and
operation is to be continued.
0: Operation is disabled.
1: Operation is enabled. Although operation is still possible even when con-
densation has formed, the unit's operation cannot be guaranteed.
Since the tape may be damaged or other trouble may occur when "1:
Operation is enabled" is selected, "0: Operation is disabled" is normally
This selects whether the direct search operation is to be performed.
DIAL: Direct search mode
KEY: No direct search mode (The search dial is operable in the STILL mode
This selects whether the tape is automatically rewound to the beginning when
the end of the tape is detected in the PLAY, REC, or SHTL modes.
0: Transport stops at the end of the tape.
1: The tape is automatically rewound to the beginning.
This is used to select the mode to which the unit is to be set when the ALL
STOP button is pressed.
0: The unit is set to the STOP mode.
1: The unit is set to the still-picutre mode (SHTL +0.0, JOG STILL).
Description of setting