Step 2. To Connect The Logic Analyzer - HP 54620A User's And Service Manual

Step 2. To connect the logic analyzer

Using the 8-by-2 test connector and BNC cable assembly, connect
1
channels 0-7 to one side of the BNC Tee.
Using a BNC-banana cable, connect the voltmeter to the other side of
2
the BNC Tee.
Connect the BNC Tee to the Main Signal output of the function
3
generator.
Figure 56
Threshold Test Setup
Testing, Adjusting, and Troubleshooting the Analyzer
Step 2. To connect the logic analyzer
54620A
STORAGE
LOGIC ANALYZER
16 CHANNEL 500 MSa/s
Measure time
Save/Recall Entry
HORIZONTAL
TRIGGER
Delay
CHANNEL
Time/Div
Select
INPUTS
Position
Trigger out Ext trigger in
L i n e
171