Panasonic MN34120PAJ Manual page 92

Confidential
Until : Indefinite
4. Packing
Up to 1200 devices are packed in a single box that holds two aluminum packs.
W hen only one aluminum pack is packed in a single box,Spacer is used to fill up the space.
4-(1) Packing case external view (Units: mm)
185
4-(2) Packing Diagram
1) Packing case is assembled.
2) Two aluminum packs are inserted in the packing case.
One shock absorbing pad is inserted between the lower and upper levels.
If one aluminum pack, one spacer is inserted in the upper level.
3) The packing case lid is sealed with precision component packing tape.
4) Product name (C-3) labels are placed in clearly visible positions
on the sides and top of the box.
5) A D-label is attached at the stipulated location on the side of the box.
Packin case
・ Case of two Aluminum packs
Pad
Aluminum
packs
（ two packs ）
Packing case
2015/10/01
Enactment Revision
Specifications
100
367
Aluminum pack Pad
・ Case of one Aluminum pack
Aluminum
pack
(one pack)
Packing case
Aluminum pack
Spacer
Pad
Product name (C-3) label
(Product name, quantity, shipping date)
Generalplus Technology Inc.
Panasonic Semiconductor Solutions Co., Ltd.
MN34120PAJ
Total Page
Page
90
96
Tape
D-label