ETAS
5.2.3
Measurement of the Signal State (State)
At each sampling point, the active or inactive state of the input signal is deter-
mined. The active state is represented by the value 1 or HIGH, the inactive state
by the value 0 or LOW.
Input
Signal
Act ive
Inact ive
Fig. 5-8
In the application software, it can be defined at which input channels of the
ES930.1 the state should be measured.
NOTE
The state of a non-selected input channel is set to the value 0.
ES930.1 - User Guide
Inactive
Inact ive
St at us
St atus
Measurement of active and inactive State (fixed measure Rate)
Digital Input Channels ("DI" Connection)
Act ive
Act ive
St at us
St at us
Time
Inact ive
St at us
37