Inputs (Connections "Di", "Ai 1-4" And "Ai 5-8"); Outputs (Connections "Do" And "Ao"); Half-Bridges ("Ps" Connection); Service" Connection - ETAS ES930.1 User Manual

ETAS
11.3.4

Inputs (Connections "DI", "AI 1-4" and "AI 5-8")

For the connection of the inputs "DI", "AI 1-4" and "AI 5-8" of the module, three
CBAV420.1 cables are required.
Cabling the inputs of the ES930.1
11.3.5

Outputs (Connections "DO" and "AO")

To connect the outputs "DO" and "AO" of the module, two CBAV421.1 cables are
required.
Cabling the outputs of the ES930.1
11.3.6

Half-bridges ("PS" Connection)

To connect the Half-bridges of the module, a CBAV422.1 cable is required.
Cabling the Half-bridges of the ES930.1
11.3.7

"SERVICE" Connection

No functions are provided at the "SERVICE" connection. The connection is
reserved exclusively for ETAS-internal applications.
ES930.1 - User Guide
1. Connect a CBAV420.1 cable with the "DI" connection of the
ES930.1.
2. Connect a CBAV420.1 cable with the "AI 1-4" connection of the
ES930.1.
3. Connect a CBAV420.1 cable with the "AI 5-8" connection of the
ES930.1.
4. Connect the open ends of the cables with the measuring
setup.
1. Connect a CBAV421.1 cable with the "DO" connection of the
ES930.1.
2. Connect a CBAV421.1 cable with the "AO" connection of the
ES930.1.
3. Connect the open ends of the cables with the measuring
setup.
1. Connect a CBAV422.1 cable with the "PS" connection of the
ES930.1.
2. Connect the open ends of the cable with the measuring setup
and the supply voltage for the Half-bridges.
Startup
74