Fig. 9-3 "Digital Output" Functionality; Fig. 9-4 "Pwm Output" Functionality; Fig. 9-5 "Pulse Out" Functionality - ETAS ES930.1 User Manual

ETAS
9.3 Functionalities
9.3.1 "Digital Output" Functionality
Upon request, the state of an output channel can be set to active or inactive.
The request can be initiated by the simulation processor.
Output
Signal
Active
Inactive
Fig. 9-3
9.3.2 "PWM Output" Functionality
PWM signals can be generated with defined values for the active and inactive
time.
Output
Signal
Active
Inactive
Fig. 9-4
An additional request, which arrives during the processing of the first request,
is discarded.
9.3.3 "Pulse Out" Functionality
Pulses can be generated with defined value for the active time.
.
Output
Signal
Active
Inactive
Fig. 9-5
An additional request, which arrives during the processing of the first request,
is discarded.
ES930.1 - User Guide
Request
"Digital Output" Functionality
Request
"PWM Output" Functionality
Request
"Pulse Out" Functionality
Digital Output Channels ("DO" Connection)
Time
Time
Time
58