Standards And Norms; Declarations Of Conformity; Rohs Conformity; Ce Conformity - ETAS ES930.1 User Manual

ETAS
13.2

Standards and Norms

The module adheres to the following standards and norms:
Standard
EN 61326-1
EN 61000-6-2
EN 61000-6-4
The module is designed only for use in industrial environments in accordance
with EN 61000-6-4. When using the module outside of industrial environments
avoid possible radio disturbances by additional shielding measures!
NOTE
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
13.3

Declarations of Conformity

13.3.1

RoHS Conformity

13.3.1.1 European Union (EU)
The EU Directive 2002/95/EU limits the use of certain dangerous materials for
electrical and electronic devices (RoHS conformity).
ETAS confirms that the product corresponds to this directive which is applica-
ble in the European Union.
13.3.1.2 Peoples Republic of China
ETAS confirms that the product meets the product-specific applicable guide-
lines of the China RoHS (Management Methods for Controlling Pollution
Caused by Electronic Information Products Regulation) applicable in China
with the China RoHS marking affixed to the product or its packaging.
13.3.2

CE Conformity

13.3.2.1 European Union (EU)
With the CE mark attached to the product or its packaging, ETAS confirms that
the product corresponds to the product-specific, applicable directives of the
European Union.
The CE Declaration of Conformity for the product is available upon request.
ES930.1 - User Guide
Test
Electrical equipment for measure-
ment, control and laboratory use -
EMC requirements
Immunity (industrial environments)
Emission standard (industrial environ-
ments)
Technical Data
87