ETAS ES930.1 User Manual page 103

ETAS
14.1.2 "DI" Connection
10
15
11
6
Fig. 14-2
ES930.1 "DI" connection
Pin
1
2
3
4
6
7
8
9
5, 10, 11, 12, 13,
14, 15
*)
: common ground
A 15-pin high density DSUB socket is installed at the "DI" connection.
An overview of the assignment of the open ends of the CBAV420.1 cable for
use at the "DI" connection is located in chapter 14.2.1 on page 112.
Users who want to fit their own cables for the "DI" connection, must observe
the notes about the design of the CBAV420.1 cable offered by ETAS to avoid
damage to the module (see chapter 14.2.1 on page 112).
Please observe the recommendation for measurement setups with different
ground potentials or with measurement points separated in distance (see
chapter 14.2.1 on page 112).
ES930.1 - User Guide
5
1
"DI" Connection
Signal
DI_CH1
DI_CH2
DI_CH3
DI_CH4
DI_CH1_GND
DI_CH2_GND
DI_CH3_GND
DI_CH4_GND
N.C.
CAUTION
CAUTION
Pin Assignment and Accessories
Meaning
Digital input channel 1
Digital input channel 2
Digital input channel 3
Digital input channel 4
Digital input channel 1, ground
Digital input channel 2, ground
Digital input channel 3, ground
Digital input channel 4, ground
Not connected
*)
*)
*)
*)
103