System Requirements; Environmental Conditions; Hardware - ETAS ES930.1 User Manual

ETAS
13.8

System Requirements

13.8.1

Environmental Conditions

Operating temperature range
Storage temperature range
(module without packaging)
Altitude
Protection class
Contamination level
Loss of features as defined by IP30!
Do not open or change the module!
Work on the module must only be carried out by specialist, qualified person-
nel.
NOTE
The module is suitable for use in interiors, in the passenger cell or in the trunk
of vehicles. The module is not suitable for installation in the engine compart-
ment and similar environments.
13.8.2

Hardware

Operating the ES930.1 module requires a DC voltage supply of 7 V to 29 V and
operating the Half-bridges (power stages) of the ES930.1 requires a DC voltage
supply of 7 V to 32 V.
13.8.2.1 PC with one Ethernet Interface
A PC with one open Ethernet interface (100 Mbit/s, full duplex) with RJ-45 con-
nection is required.
Requirement to ensure successful Initialization of the Module
NOTE
It is imperative you disable the function which automatically switches to
power-saving mode on your PC network adapter when there is no data traffic
on the Ethernet interface!
13.8.2.2 To deactivate the Power saving Mode
Choose in System Control Center / Device Manager / Network Adapter the
used network adapter by double-click. Deactivate the "Allow the computer to
turn off this device to save power" option in the "Power Management" register.
Confirm your configuration.
ES930.1 - User Guide
CAUTION
-40 °C to +70 °C
-40 °F to +158 °F
-40 °C to +85 °C
-40 °F to +185 °F
Max. 5000 m / 16400 ft
IP30
2
Technical Data
90