Fig. 14-10 Cable For Inputs And Outputs - ETAS ES930.1 User Manual

ETAS
14.2 Cable for Inputs and Outputs
The CBAV420.1 cable is used for the inputs, the CBAV421.1 cable for the out-
puts and the CBAV422.1 cable for the Half-bridges (power stages) (see
Fig. 14-10 on page 111 and the following table).

Fig. 14-10 Cable for Inputs and Outputs

ES930.1 connection
TH1-4
PS
DO
DI
AO
AI 5-8
AI 1-4
For the connection of the inputs and outputs of the module, three CBAV420.1
cables, two CBAV421.1 cables and one CBAV422.1 cable are required.
The open connections of the cables CBAV420.1, CBAV421.1 and CBAV422.1
can be fitted individually by the user, so that it can be adapted to the specific
plug connector system of the measuring setup.
ES930.1 - User Guide
CBAV421 CBAV420
Cable
Thermo channel Thermocouple
Power stages CBAV422.1
Digital outputs CBAV421.1
Digital inputs CBAV420.1
Analog outputs CBAV421.1
Analog inputs CBAV420.1
Analog inputs CBAV420.1
Pin Assignment and Accessories
CBAV422
CBAV421 CBAV420 CBAV420
111