Using The System; Software Configuration; System Recovery - ADLINK Technology DLAP-211-JNX Series User Manual

3

Using the System

3.1 Software Configuration

The DLAP-211 ships with a customized NVIDIA Linux for Tegra
(L4T) image pre-installed. The latest version of this custom L4T
image and other relevant files are available on the ADLINK web-
site.
DLAP-211 with NX:
https://www.adlinktech.com/Products/Deep_Learning_Accelerator
_Platform_and_Server/Inference_Platform/DLAP-211-JNX
DLAP-211 with Nano:
https://www.adlinktech.com/Products/Deep_Learning_Accelerator
_Platform_and_Server/Inference_Platform/DLAP-211-Nano

3.2 System Recovery

You will need a Linux host PC (Ubuntu is recommended) in order
to flash your client device with a new system image. Complete the
following steps on the client before performing the host PC steps.
Client:
1. Connect the OTG cable to the USB 2.0 port.
2. Press the reset and recovery buttons at the same time.
3. Press the power switch.
4. Release the reset button.
5. Release the recovery button.
Host PC:
1. Install Python 2.7, python-minimal (or equivalent pack-
ages) and qemu-user-static on the host PC.
2. Connect the host PC to the client via OTG cable.
3. Open a terminal on the host PC and run this command:
# lsusb
Using the System
DLAP-211-JNX / DLAP-211-Nano Series
29