Cleaning - AGFA DR 600 User Manual

Cleaning

To clean the exterior of the equipment:
1. Stop the system
2. Wipe the exterior of the system with a cloth slightly moistened with a
neutral detergent.
3. Start up the system.
Related Links
Stopping the System
Starting the System
Moving the system to cleaning position
Cleaning the tube head display during operation
To clean the tube head display during operation
WARNING:
When the equipment is going to be cleaned, be sure to turn
off the main power of the system. Never use anhydrous or
high solvency alcohols, benzine, thinner or any other
flammable cleaning agent. Otherwise, it may result in fire or
electric shock.
CAUTION:
Make sure no liquid gets in the device.
CAUTION:
Clean the equipment with only a little moisture. Do not
spray disinfectants or detergents directly on the equipment.
Do not pour liquid directly on the equipment.
CAUTION:
Do not use solvents such as anhydrous or high solvency
alcohols, thinner or benzine. Do not use any corrosive,
dissolving or abrasive cleaning or polishing detergents.
Doing so may damage the surface of the equipment. Using
unsuitable cleaning agents or methods can damage the
property when surface becomes dull and brittle (e.g. by
using alcohol-containing agents).
Note: Do not open the equipment for cleaning. No
components inside the device require cleaning by the user.
on page 121
on page 92
on page 165
DR 600 | Introduction | 75
3261K EN 20210708 0808