Stop Positions - AGFA DR 600 User Manual

184 | DR 600 | Ceiling Suspension

Stop positions

The system includes stop positions for manual movement of the X-ray tube
head.
The preferred positions of the stops are defined during installation.
The stop positions are used to position the system manually for typical
radiographic examinations, e.g. a SID of 180 cm for chest examinations.
Stop positions are different for radiographic table and radiographic wall
stand. Which stop positions are active depends on the active modality
position, selected on the Software Console.
To enter a stop position, move the X-ray tube head unit using the control
buttons. The movement is stopped when a stop position is reached. Move at a
regular speed to prevent the X-ray tube head unit to skip the stop position.
To leave a stop position, release and press again the according movement
control button.
3261K EN 20210708 0808