224 | DR 600 | Bucky
Unloading of the bucky in the Radiographic Table
To unload the bucky with a cassette or detector:
1. Open the bucky drawer completely by pulling the front handle.
2. Push firmly with both hands the cassette or detector towards the rear
clamp to open the clamping mechanism.
3. Lift the cassette or detector and remove it from the clamping. The
openings in the carrier allow your fingers to grip the detector or cassette.
4. Load the bucky with another cassette or detector.
• Alternatively, close the bucky drawer using the front handle and
3261K EN 20210708 0808
CAUTION:
Make sure your fingers are not between slider and detector.
The clamping mechanism may hurt your fingers, therefore
take special care.
pushing the button to release the brake.