Table of Contents
Advertisement
Problem solving
Topics:
•
Restoring connection between generator and NX after generator failure
•
Automatic collimation always too wide or too narrow
•
NX does not connect to the generator due to ID tablet
•
No table movement
•
No movement when using remote control
•
DR Detector is Exceeding the Maximum Working Temperature
•
DR Detector must be Recalibrated
•
Tube head display shows screen to check network connection
•
Radiographic Parameter Limits
DR 600 | Problem solving | 255
3261K EN 20210708 0808
Advertisement
Table of Contents
