Collision Indicator - AGFA DR 600 User Manual

Collision indicator

Motorized movement is protected by a collision indicator. The collision
indicator avoids collision of the X-ray tube head with the table or the wall
stand.
The collision indicator will give a signal and stop motorized movement in
following situations:
• The X-ray tube head moves closer than 45 cm to the tabletop or the wall
stand front panel.
• The X-ray tube head moves closer than 10 cm to the side of the table or
wall stand or any other fixed object in the room (e.g. a wall).
Motorized movement is also stopped in following situations:
• The target position is reached successfully.
• The movement is blocked.
• The automatic positioning button is released.
• The emergency stop button is activated.
Automatic positioning cannot be started if there is no safe path to reach the
target position.
Manual movement is also protected by a collision indicator. The movement
range is larger than for motorized movement.
The manual movement can be resumed by releasing the movement control
button and pressing it again.
Related Links
Tracking the radiographic wall stand
DR 600 | Ceiling Suspension | 185
on page 169
3261K EN 20210708 0808