Table of Contents
Advertisement
Mounting the lateral arm rest
Take care that the lateral arm rest does not collide with the ceiling when
moving the bucky upward manually. For automatic movement, a sensor
detects if the lateral arm rest is inserted and the movement is coordinated
accordingly.
Do not insert the lateral arm rest oriented parallel to the bucky. The lateral
arm rest may collide with the wall stand column.
To mount and position the lateral arm rest:
1. Insert the lateral arm rest on the left or on the right side of the bucky
frame.
2. Grip the lower part of the lateral arm rest.
3. Pull the lateral arm rest forward
4. Adjust the angle.
5. Move the lateral arm rest back to fix the position.
Figure 98: Lateral arm rest
Movement of the X-ray tube head is restricted in the neighbourhood of the
lateral arm rest, to avoid collisions. To allow free movement of the tube head,
the lateral arm rest must be unmounted from the wall stand. It is not sufficient
to turn it 90 degrees out of the way.
CAUTION:
The lateral arm rest can bear up to 20 kg. It is not intended to
hold the whole weight of a patient.
4
1
2
5
3
DR 600 | Radiographic Wall Stand | 215
3261K EN 20210708 0808
Advertisement
Table of Contents
