Additional Labeling Of The Radiographic Wall Stand - AGFA DR 600 User Manual

Additional Labeling of the Radiographic Wall Stand

Figure 27: Example of type
label
Related Links
Warning labels on the radiographic wall stand
Wall Stand Technical Data
Type label on the rear side of the bucky.
The type label information for each combina-
tion of X-ray tube and X-ray generator is availa-
ble in the technical data.
This mark indicates that this is a Type B Equip-
ment
Functional earth
The bucky can be tilted to horizontal position.
Do not use the bucky as a seat.
The maximum load for the bucky movement in
vertical direction is 20 kg.
A pinch point label is located on top of the tilt-
ing extension.
Additional pinch point labels are located at the
top and at the bottom of the rail in the Wall
Stand column.
on page 286
DR 600 | Introduction | 63
on page 58
3261K EN 20210708 0808