Connectivity - AGFA DR 600 User Manual

Connectivity

The NX workstation is connected to the X-ray system to exchange X-ray
exposure parameters.
The NX workstation requires a 100 Mbit ethernet network to exchange
information with a number of other devices.
The NX workstation communicates with other devices in the hospital network
using one of the following protocols:
• DICOM
• IHE
The NX workstation can be connected to a RIS system (input scheduling), a
PACS system (output image/data management) and to a hardcopy device
(output image).
Note: The connections between the components of the system are
separate from the hospital network and should not be disconnected
or modified.
DR 600 | Product Information | 267
3261K EN 20210708 0808