Connectivity; Connecting Dr 100E To A Wired Network - AGFA DR 100e User Manual

Connectivity

DR 100e requires a TCP/IP network to exchange information with a number of
other devices. The recommended minimum network performance is 100 Mbit
for wired ethernet and IEEE 802.11 g for wireless network.
DR 100e communicates with other devices in the hospital network using one
of the following protocols:
• DICOM
• IHE
DR 100e can be connected to a RIS system (input scheduling), a PACS system
(output image/data management) and to a hardcopy device (output image).

Connecting DR 100e to a wired network

To connect DX-D 100 to a wired network:
1. Place the unit in parking position.
2. Connect a network cable to the connector for the hospital network and
plug it into a network socket.
Figure 50: Wired network connector
Related Links
Connectors for the hospital network and for registering a DR Detector
DR 100e (Digital Radiography) | Product Information | 97
Note: A wireless network operating on variable speed or subject to
interruptions will cause delays on the NX workstation.
on page 29
0365B EN 20181015 0853