Connectivity - AGFA Valory User Manual

Valory (system with floor mounted column) | Product Information | 173

Connectivity

The NX workstation is connected to the X-ray system to exchange X-ray
exposure parameters.
The NX workstation requires a 100 Mbit ethernet network to exchange
information with a number of other devices.
The NX workstation communicates with other devices in the hospital network
using one of the following protocols:
• DICOM
• IHE
The NX workstation can be connected to a RIS system (input scheduling), a
PACS system (output image/data management) and to a hardcopy device
(output image).
Note: The data connections between the components of the system
are separate from the hospital network and should not be
disconnected or modified.
0426A EN 20220804 1858