ABB 2600T Pressure Transmitter Series User Manual page 68

364xS User's Manual 68
Note for pressure transmitter with combined approval
WARNING
Before installing the Transmitter, the end user has to permanent mark on the nameplate his choosen
Protection Concept (including general purpose in an unclassified location). The Transmitter can only be used
according to this Protection Concept for the life of the product. If more then one type of protection box (on
safety label) are permanent marked, the Pressure Transmitter must be removed from hazardous
classified locations. The selected Type of Protection is allowed to be changed only by manufacturer after a
new satisfactory assessment.
Additional Safety