Hart Transmitter; Accessing Communication Data; Accessing Communication Data By Digital Lcd Integral Display - ABB 2600T Pressure Transmitter Series User Manual

364xS User's Manual
To define the Variable Engineering Units in the display:
Navigate the Digital LCD Integral Display menu, select
the possible engineering variables will be available. To select the type push
down keys; confirm with OK.
Pressure
Temperature
Flow
Mass & Volume
Density
Level
Other
Custom Unit
The in-use unit for the type will be available. To modify select
and down keys and confirm with OK.
Digital LCD Integral Display Keys sequence to modify the define the Variable Engineering Units in the display: 3 – 7 - 1
To protect the Display from changes:
Navigate the Digital LCD Integral Display menu, select
actual protection will be available (Unlock and Lock). To modify select
with the up and down keys and confirm with
Digital LCD Integral Display Keys sequence to protect the Display: 3 – 8 – 1 – Edit
To change the Display Password:
The Display Password is a five digit string. The default value, at the transmitter delivery is
default password does not give the possibility to lock
Navigate the Digital LCD Integral Display menu, select
actual password will be available. To modify select
up and down keys and confirm with
Digital LCD Integral Display Keys sequence to change the Display password: 3 – 8 – 2 – Edit

HART Transmitter

Accessing Communication data

The Operation data access could be necessary to look or verify the transmitter configuration.

Accessing Communication data by Digital LCD Integral Display

To access the transmitter communication data:
Navigate the Digital LCD Integral Display menu, select
down keys select one of the following submenu:
Hart Tag
Descriptor
Message
Polling Address
To modify select Edit then scroll the desired alphanumeric symbol with the up and down keys and confirm
with Next. Repeat the operation for the necessary digits and confirm with OK
Digital LCD Integral Display Keys sequence to access the transmitter communication data: 5
Display
Display
OK.
Display
Edit then scroll the desired alphanumeric symbol with the
Next. Repeat the operation for the five digits and confirm with
Communication,
to view e modify the transmitter Tag
to view e modify the transmitter Descriptor
to view e modify the transmitter Message
to view the polling address
> Display Settings > Display Eng.
Edit and select with up and
Edit then scroll the desired Unit with the up
> Security > Display Protection, and the
Edit then scroll the desired protection
> Security > Change
scroll the submenu with the up and
46
Unit, and
. This
Password, and the
OK.
Operation