Set The Damping Configuration By Pc; Set The Units; Set The Units By Digital Lcd Integral Display - ABB 2600T Pressure Transmitter Series User Manual

364xS User's Manual

Set the Damping configuration by PC

Damping configuration by PC is available using dedicated Software. ABB can provide the references and the
Software. Please refer to the Software instructions for the appropriate operations.

Set the Units

To monitor the process using the appropriate units follow one of the methods described in the next
paragraphs.

Set the Units by Digital LCD Integral Display

To change the unit in the Digital LCD Integral Display
Navigate the Digital LCD Integral Display menu, select
the possible Engineering variables will be available. To select the type, push
down keys; confirm with OK.
Pressure
Temperature
Flow
Mass & Volume
Density
Level
Other
Custom Unit
The in-use unit for the type will be available. To modify select
following tables) with the up and down keys and confirm with
Units for Pressure variable
mbar millibar
2
g/cm grams per square centimeter
2
Kg/cm kilo grams per square centimeter
Pa pascal
kPa kilopascal
torr torr
atm atmosphere
MPa Megapascal
inH2O°C inches of water at 4 degrees Celsius
Units for Temperature variable
°C degree Celsius
°F degree Fahrenheit
°R degree Rankine
K Kelvin
Display > Display Settings
Edit then scroll the desired unit (see the
OK.
mmH2O°C millimeter of water at 4 degrees Celsius
inH2O°F inches of water at 68 degrees Fahrenheit (20°C)
inHg°C inches of mercury at 0 degrees Celsius
ftH2O°F feet of water at 68 degrees Fahrenheit (20°C)
mmH2O°F millimeter of water at 68 degrees Fahrenheit (20°C)
mmHg°C millimeter of mercury at 0 degrees Celsius
psi pounds per square inch
bar bars
25
> Display Eng. Unit, and
Edit and scroll with a up and
Configuration