Set The Totalizer By Hht; Set The Totalizer By Pc - ABB 2600T Pressure Transmitter Series User Manual

364xS User's Manual
To set the Batch Totalizer Engineering units:
Navigate the Digital LCD Integral Display menu, select
Engineering Unit, and the used Batch Totalizer Engineering Units will be available. To modify select
then scroll the desired unit (see the following table) with the up and down keys and confirm with OK.
L liter
hl hectoliter
3
in
cubic inch
3
ft cubic feet
3
yd cubic yard
gallon US gallon
ImpGal Imperial gallon
bushel bushel
bbl barrel
bbl liq barrel liquid
SCF standard cubic feet
Digital LCD Integral Display Keys sequence to set the Batch Totalizer Engineering units: 4 – 3 – 5 – 1 – Edit
To set the Batch Totalizer Custom unit:
Navigate the Digital LCD Integral Display menu, select
Custom Unit, and the used Batch Totalizer Custom Units will be available. To modify select
the desired alphanumeric symbol with the up and down keys and confirm with
the six digits and confirm with
Digital LCD Integral Display Keys sequence to set the Batch Totalizer Custom units: 4 – 3 – 5 – 2 – Edit
To set the Batch Totalizer Conversion Factor:
Navigate the Digital LCD Integral Display menu, select
Conversion Factor, and the used Batch Totalizer Conversion Factor will be available. To modify select
then scroll the desired value with the up and down keys and confirm with
seven digits and confirm with
Note: the minimum and the maximum values to introduce are indicated on the display.
Digital LCD Integral Display Keys sequence to set the Batch Totalizer Conversion Factor: 4 – 3 – 5 – 3 – Edit
To set the Bidirectional Flow mode:
During this operation the Totalizer status has to be in "Off" mode and the Transmitter Transfer function has to
be in Bidirectional Flow (see this manual for the appropriate procedure). Navigate the Digital LCD Integral
Display menu, select Totalizer
Flow will be available. To modify select
following table) and confirm with
Add
Subtract
Digital LCD Integral Display Keys sequence to set the Bidirectional Flow mode: 4 – 3 – 6 – Edit

Set the Totalizer by HHT

Totalizer configuration by Hand Held Terminal is available. Please refer to the device manual for the
appropriated operations.

Set the Totalizer by PC

Totalizer configuration by PC is available using dedicated Software. ABB can provide the references and the
Software. Please refer to the Software instructions for the appropriate operations.
3
Nm
NL
g
kg
t
lb
STon
LTon
oz
3
m
OK.
OK.
> Totalizer setting > Bidirectional Flow
Edit then scroll the desired value with the up and down keys (see the
OK.
the positive and negative flows are added
the total flow is the positive minus the negative
Totalizer > Totalizer setting
Normal cubic meter
Normal liter
gram
kilogram
ton
pound
short ton
long ton
ounce
cubic meter
Totalizer > Totalizer setting
Next.
Totalizer > Totalizer setting
Next. Repeat the operation for the
>, and the used Totalizer Bidirectional
31
> Batch Eng. Unit >
Edit
> Batch Eng. Unit >
Edit then scroll
Repeat the operation for
> Batch Eng. Unit >
Edit
Configuration