Configuration - Pilz PMCprotego S1 Operating Manual

4 Function Description
4.6

Configuration

4- Funkt_Konfiguration Configuration 4600 Configuration 4.6
4-40
The safety functions to be carried out by the safety card are defined in
the safety card's configurator:
Configuration of the safety functions

Setting of limit values, braking ramps for the safety functions, moni-

toring of motion sequences
Download configuration:
On single-axis systems, via the RS 232 interface on the servo ampli-

fier
On networked systems, via the RS 232 or Ethernet interface on the

motion control system. The control system passes the configuration
to the respective safety card.
Download configuration to safety card:
Online from configurator to safety card.

Save configuration to external SD card.

Order and serial numbers must be entered in the configuration to en-

sure the safety card is addressed securely.
The feasibility of the configuration is checked as it is downloaded.

Enabling of the power element after download depends on the status

of the inputs on the safety card.
Upload configuration from safety card:
Online from safety card to configurator

Save safety card configuration to SD card in the servo amplifier.

The feasibility of the configuration is checked as it is uploaded.

INFORMATION
Further information on the configuration and parameter settings
for the safety functions is available in the safety card configura-
tor's online help.