Standards - Pilz PMCprotego S1 Operating Manual

3 Safety
3.2

Standards

3- Sicherheit_Normen_Sicherheitskarte Standards 3200 Standards 3.2
3-4
Knowledge of and compliance with the relevant standards and direc-
tives are a prerequisite for using the safety card. The following standards
are relevant:
EN 61326-3-1:2008: Electrical equipment for measurement, control

and laboratory use - EMC requirements
EN 61800-3:2004: Adjustable speed electrical drives

EN 61800-5-2:2007: Adjustable speed electrical power drive systems

– Part 5-2: Safety requirements. Functional
EN ISO 13849-1:2008: Safety of machinery – Safety-related parts of

control systems – Part 1: General principles for design, Part 2: Valida-
tion
EN 61508:1998: Functional safety of safety-related electrical/elec-

tronic/programmable electronic control systems, Parts 1, 3, 4
EN 61508-2:2000: Requirements for safety-related electrical/elec-

tronic/programmable electronic systems
EN 60204-1:2007: Safety of machinery – Electrical equipment of ma-

chines – Part 1: General requirements
EN 62061:2005: Safety of machinery – Functional safety of safety-re-

lated electrical, electronic and programmable electronic control sys-
tems
Please note this is not an exhaustive list of safety standards and direc-
tives.