Advertisement
3
Safety
3.1
Intended use
3- ][BA_Sicherheit_Bestimmung_FS
Safety
3 3 000
Intended use
3100
Intended use
3- 3.1
Safety
Sicherheit_Bestimm_prot_S
Sicherheit_Impulssperre_S1
Sicherheit_Impulssperre_Info
Sicherheit_Bestimmung_Ausschluss_S1_S2
Sicherheit_Bestimm_Dokumente
Sicherheit_Bestimm_Produkte
The safety card PMCprotego S1 is an expansion of the servo amplifier
PMCprotego D. It is designed for use in safety-related applications.
It meets the requirements for safety functions in accordance with
EN 61800-5-2, with regard to safe motion monitoring.
The safety card meets the requirements of EN IEC 61508 up to SIL 3
and EN ISO 13849-1 up to PL e.
To achieve category SIL 3 or PL e, the operator must ensure that the
function of the safe pulse disabler is tested periodically, after 8 hours at
the latest, by triggering safety functions SS1 or STO:
By restarting after safety functions SS1 or STO have been triggered
as a condition of operation
or
By restarting after safety function SS1 has been triggered by the op-
erator
INFORMATION
To test the safe pulse disabler through deliberate operator
action, see the section entitled "Operation", under "Testing the
safe pulse disabler".
The following is deemed improper use:
Any component, technical or electrical modification to the servo am-
plifier
Use of the servo amplifier outside the areas described in this manual
Use of the servo amplifier outside the documented technical details
(see chapter entitled "Technical Details")
Intended use includes making the installation and wiring EMC-compli-
ant.
Intended use also includes compliance with the
Operating manual for the PMCprotego D
Online help for the configuration tool PASconfig SDrive.
3-1
Advertisement
Chapters
