Advertisement
8
Operation
8.4
Messages
8- Betrieb_Fehlermeldungen
Messages
8400
Messages
8.4
8-6
Any errors on the safety card are indicated on the servo amplifier display
with message "F31".
The following options are available for detailed diagnostics and fault de-
tection:
LEDs on the front of the safety card provide information on operating
states (see section on "Display elements" in this chapter).
Outputs on the safety card display the state of the safety functions
(e.g. STO Acknowledge).
Errors and messages are entered in the safety card's error stack.
The following are displayed in online mode in the Configurator PAS-
config SDrive:
– Safety card status messages and error messages (error stack)
– States of safety card inputs and outputs
– Errors and states of inputs and outputs on the motion control sys-
tem
See also "Servo amplifier configuration software"
Errors, messages and the corresponding remedies are displayed in
the expanded diagnostics system PVIS.
Advertisement
Chapters
