Download Configuration From Configurator - Pilz PMCprotego S1 Operating Manual

7 Commissioning
7.3 Recommissioning
Configurator
RS 232
Ethernet
7.3.3.1 Download configuration from Configurator to safety card
7- Inbetrieb_Konf_uebertragen_Tool_Sicherheitskarte Download configuration from Configurator to safety card
Configurator
2
SD
3
SD
4
Fig. 7-1: Download configuration
Key:
Downloading a configuration from the Configurator directly to safety
card 1
Downloading a configuration via an SD card, which is written by the PC
2
Inserting an SD card into the read device of the servo amplifier for safe-
3
ty card 1
Downloading a configuration to the safety card from an SD card in the
4
servo amplifier
Downloading a configuration via an SD card, which is written by the
5
servo amplifier (safety card 2)
Inserting an SD card from the servo amplifier for safety card 2 into the
6
read device of the servo amplifier for safety card 3
The configuration data on the safety card can be downloaded direct-
ly from the Configurator to the safety card in the servo amplifier.
Prerequisite:
Connection is established between the PC and servo amplifier

(RS 232 or Ethernet).
Configurator
RS 232
Ethernet
5
6
SD
5
SD
4
7-9