Figure 19: Pre-Installing The Holding Brack- Etsscrew The Set Screwsinternal Hexagon; Figure 20: Installing The Holding Brackets - Eaton XV300 Manual

3. Installation
3.3 Mounting
44
XV-303-70-.., XV-303-10-..
Pre-installing the holding brackets
Screw the set screwsInternal hexagon M4x25
DIN 914 galvanized into the holding brackets
XV-303-15-..
Figure 19: Pre-installing the holding brackets
Screw the set screwsInternal hexagon M4x25
DIN 914 galvanized into the holding brackets
XV300 04/19 MN048017EN www.eaton.eu
Insert the holding brackets into the enclosure

Figure 20: Installing the holding brackets