Maintenance; Cleaning And Maintenance; Capacitive Multi-Touch Technology (Pct); Battery - Eaton XV300 Manual

7. Maintenance

7.1 Cleaning and maintenance

7.1.1 Capacitive multi-touch technology (PCT)

7.1.2 Battery

7.2 Repairs

The XV300 are maintenance-free.
However, the following work may need to be carried out:
Cleaning the Capacitive multi-touch technology (PCT) when soiled.
l
Recalibrating the Capacitive multi-touch technology (PCT) if it stops responding cor-
l
rectly to touch.
When soiled:
CAUTION
POINTY, SHARP OBJECTS AND CORROSIVE LIQUIDS
When cleaning the XV300:
Do not use any pointy or sharp objects (e.g., knives).
l
Do not use aggressive or abrasive cleaning products or solvents.
l
Make sure that no liquids get into the XV300 unit (short-circuit hazard)
and that the XV300 unit is not damaged in any way.
Clean the Capacitive multi-touch technology (PCT) with a clean, soft, damp cloth.
The internal battery used to back up the real-time clock is maintenance-free and is
sized for a backup time of approx. 10 years at 25° C (77°F) when de-energized,
provided the corresponding ambient conditions are met.
For repairs, please contact your distributor or Eaton's Technical Support.
CAUTION
DESTRUCTION
The XV300 should only be opened by the manufacturer or by an author-
ized center. Operate the XV300 until only with the enclosure fully closed
and sealed.
Use the original packaging to ship the device.
XV300 04/19 MN048017EN www.eaton.eu
7. Maintenance
7.1 Cleaning and maintenance
75