Legal Disclaimer; Device Designations And Abbreviations; Writing Conventions; Table 1: Format Conventions Used Throughout This Manual - Eaton XV300 Manual

0.1.3 Legal Disclaimer

0.1.4 Device designations and abbreviations

0.1.5 Writing conventions

All the information in this manual has been prepared to the best of our knowledge and in
accordance with the state of the art. However, this does not exclude the possibility of
there being errors or inaccuracies. We assume no liability for the correctness and com-
pleteness of this information. In particular, this information does not guarantee any par-
ticular properties.
Do not use the XV300 before reading and understanding this manual.
It is assumed that the user of this manual is thoroughly familiar with the information
found in the manuals for incorporating the XV300 into automation processes.
Hazards posed by the XV300 cannot be eliminated if the safety instructions are not
observed – especially if the XV300 is commissioned and maintained by unqualified per-
sonnel and/or the XV300 is used improperly. Eaton assumes no liability for any dam-
ages resulting from cases such as these.
The following general terms are used throughout this manual:
Brief description
XV300
HMI panel
XV300
XV-303
XV-313
SmartWire-DT
For the exact designation for your XV300, please refer to the→ "Indication
label", page 24.

Table 1: Format conventions used throughout this manual

Award
Bold text
Monospaced
Font format code
Text
Menu path\submenu\...\item
Menu/command
<name>
XV300 04/19 MN048017EN www.eaton.eu
Explanation
Product family with function code
Family
Used to refer to all the devices in the product family
Used to refer to all front mounting devices as a group
Used to refer to all rear (panel) mounting devices as a group
SmartWire-DT
Description
Used for all graphical user interface elements
Used for all elements at the file level
Used for the button labels
Path information for software windows and menu
pages
Used for commands found in the menu bar's menus
Angle brackets are used to indicate variable values
that you must replace with your own values
0.1 About this documentation
11