1.5 Interfaces to peripheral devices
The interfaces featured by your XV300 will depend on theXV version selected and can-
not be modified.
The nameplate will indicate which specific interfaces are included with the unit.
④
②
⑧
③
⑩
⑥
⑤
Figure 11: Interfaces
Basic interfaces (all XV300 models come with these interfaces)
interface
①
SD card slot
②
USB Host
③
USB device
④
Ethernet 1
⑤
COM1
⑥
COM2
⑦
CAN
Optional interfaces
⑧
Ethernet 2
⑨
Profibus
⑩
SmartWire-DT
XV300 04/19 MN048017EN www.eaton.eu
⑨
⑦
type
SDSC or SDHC conforming to the SDA 2.0 specification
USB 2.0, not galvanically isolated, plug type A, Full power (500 mA)
USB 2.0, not galvanically isolated, plug type B
RJ-45 socket, 8-pole, 2 LEDs (CAT5e/6), LAN1, 10/100 Mbps
RS-232, not galvanically isolated, SUB-D plug 9-pole, UNC nuts for inter-
locking
RS-485, not galvanically isolated, SUB-D plug 9-pole, UNC nuts for inter-
locking
CAN1, not galvanically isolated, SUB-D plug 9-pole, UNC nuts for inter-
locking
RJ-45 socket, 8-pole, 2 LEDs (CAT5e/6), LAN1, 10/100 Mbps
Profibus DP, not galvanically isolated, SUB-D socket 9-pole, UNC nuts for
interlocking
4-pin WAGO connector (article no. 734-104) and 8-pole ribbon cable plug
1.5 Interfaces to peripheral devices
①
1. Description
21