5.3 USB interfaces
5.3.1 USB Host
5.3.2 USB device
Eaton XV300 multi touch displays feature ports that can be used to connect USB peri-
pheral devices supported by the XV300's hardware and operating system.
CAUTION
When using commercially available peripheral devices (e.g., with the
USB port), it is important to keep in mind that their EMC interference
immunity parameters may render them unsuitable for use in industrial
environments.
The USB ports (USB host and USB device) on the XV300 multi touch dis-
play unit are meant for maintenance work only.
Only use standard USB cables with a shield.
Max. cable length: 5 m.
Figure 30: USB 2.0, not galvanically isolated, plug type A, Full power (500 mA)
The USB device interface supports USB 2.0.
Figure 31: USB 2.0, not galvanically isolated, plug type B
XV300 04/19 MN048017EN www.eaton.eu
5. External connections
5.3 USB interfaces
59