5.1 Layout of interfaces
5.1.0.1 Optional Interfaces
Figure 28: Interfaces included on all HMI panels
interface
①
SD card slot
②
USB Host
③
USB device
④
Ethernet 1
⑤
COM1
⑥
COM2
⑦
CAN
Figure 29: XV300 multi touch display with all optional features
⑧
Ethernet 2
⑨
Profibus
⑩
SmartWire-DT
XV300 04/19 MN048017EN www.eaton.eu
type
SDSC or SDHC conforming to the SDA 2.0 specification
USB 2.0, not galvanically isolated, plug type A, Full power (500 mA)
USB 2.0, not galvanically isolated, plug type B
RJ-45 socket, 8-pole, 2 LEDs (CAT5e/6), LAN1, 10/100 Mbps
RS-232, not galvanically isolated, SUB-D plug 9-pole, UNC nuts for inter-
locking
RS-485, not galvanically isolated, SUB-D plug 9-pole, UNC nuts for inter-
locking
CAN1, not galvanically isolated, SUB-D plug 9-pole, UNC nuts for inter-
locking
RJ-45 socket, 8-pole, 2 LEDs (CAT5e/6), LAN1, 10/100 Mbps
Profibus DP, not galvanically isolated, SUB-D socket 9-pole, UNC nuts for
interlocking
4-pin WAGO connector (article no. 734-104) and 8-pole ribbon cable plug
5. External connections
5.1 Layout of interfaces
57