Device Models - Versions And Part Nos; Basic Features; Device Variants; Optional Features - Eaton XV300 Manual

1.3 Device models - versions and part nos.

1.3.1 Basic features

1.3.2 Device variants

1.3.3 Optional features

All XV are equipped with:
- the operating system Windows Embedded Compact 7 pro
- an industrial capacitive multitouch display, PCT
- a SD/SDHC memory card slot.
Every HMI panel comes with the following integrated interfaces as standard:
One Ethernet port (10/100 Mbit/s) for use as a communication or field bus interface
l
One USB 2.0 host port for memory and other accessories, full power (500 mA)
l
One USB device 2.0,
l
One standard RS-232 (COM1) port for communicating with PLCs or devices
l
One standard RS-485 (COM2) port for communicating with PLCs or devices
l
One standard CAN interface for the CANopen protocol, J1939 protocol
l
One of the main differences between the various device models is the specific mount-
ing method that must be used when installing the devices in an enclosure.
Front mounting, in which the device is inserted into the enclosure from the front
l
Rear mounting, which provides a flush alignment with the enclosure's surface
l
The following individual options are available in order to ensure that the unit will best
meet the needs of the application at hand:
Three widescreen display sizes: 7.0", 10.1"or 15.6" widescreen
l
Device bundles with visualization software and/or control software licenses.
l
Additional integrated interfaces
Second Ethernet port (10/100 Mbit/s) for use as a communication interface
l
PROFIBUS-DP, universal field bus interface for all typical protocols
l
SmartWire-DT for an efficient use of SmartWire-DT technology and its com-
l
prehensive features
XV300 04/19 MN048017EN www.eaton.eu
1.3 Device models - versions and part nos.
1. Description
17