Before connecting the power supply
CAUTION
24 VDC power supply for integrated AC-to-DC converter.
The voltage being applied must meet the requirements for safety extra-
low voltages (SELV) set forth in IEC 60950 and the requirements for pro-
tected extra-low voltages (PELV) set forth in ICE/UL 61010-2-201.
Pay attention to the polarity.
NOTICE
Arrange for an electrician to install the Plug connector MSTB 2.5/3-ST-
5.08 and connect the power supply.
XV300 04/19 MN048017EN www.eaton.eu
3.4 Preparing the device for operation
3. Installation
49