Transport For Installation/Dismantling Purposes - Wilo Yonos GIGA2.0-I Installation And Operating Instructions Manual

en
Fig. 5: Turning the shaft
5.4 Transport for installation/dis-
mantling purposes
18
Transport and storage
To prevent scoring at the bearings and sticking, turn the pump shaft once a week using
a socket wrench (see Fig. 5).
If a longer storage time is required, contact Wilo for preservation measures.
WARNING
Risk of injury due to incorrect transport!
If the pump is transported again at a later date, it must be packaged so that it cannot
be damaged during transport. Use the original packaging for this, or choose equival-
ent packaging.
Damaged transport lugs can break off and cause considerable personal injury. Check
the transport lugs before use for damage and secure fixation.
Fig. 6: Single pump lifting direction
Fig. 7: Twin-head pump lifting direction
WILO SE 2022-05