Safety - Wilo Yonos GIGA2.0-I Installation And Operating Instructions Manual

en
6.3

Safety

20
Installation
DANGER
When dismantled, the permanent magnet rotor inside the pump can pose mortal
danger for people with medical implants (e.g. pacemakers).
• Follow the general behavioural guidelines that apply to handling electrical
devices!
• Do not open the motor!
• Dismantling and installation of the rotor may only be carried out by Wilo cus-
tomer service! If you have been fitted with a pacemaker, you must not carry out
this kind of work!
DANGER
Risk of fatal injury due to lack of protective devices!
Due to missing protective devices of the electronic module or in the range of the
coupling/motor, electric shock or contact with rotating parts can lead to life-threat-
ening injuries.
• Before commissioning, safety devices such as such as electronic module covers or
coupling covers that were removed must be reinstalled!
DANGER
Potentially fatal injury due to electronic module not being installed!
A life-threatening voltage may be present at the motor contacts!
Normal operation of the pump is only permitted with the electronic module installed.
• Never connect or operate the pump without the electronic module mounted!
DANGER
Risk of fatal injury from falling parts!
The pump itself and pump parts can be extremely heavy. Falling parts pose a risk of
cuts, crush injuries, bruises or impacts, which can be fatal.
• Always use suitable lifting equipment and secure parts against falling.
• Never stand underneath a suspended load.
• During storage and transport, as well as before all installation and assembly work,
ensure that the pump is in a safe position and standing securely.
WARNING
Personal injury due to strong magnetic forces!
Opening the motor leads to high, abruptly occurring magnetic forces. This can lead
to serious cuts, crushing injuries and bruises.
• Do not open the motor!
WARNING
Hot surface!
The entire pump can become very hot. There is a risk of burns!
• Allow the pump to cool down before commencing any work!
WARNING
Risk of scalding!
At high fluid temperatures and system pressures, allow the pump to cool down first
and then depressurise the system.
WILO SE 2022-05