Overview Of The Ssm/Sbm Relay Status - Wilo Yonos GIGA2.0-I Installation And Operating Instructions Manual

en
15.1 Diagnostics help
15.2 Device information
Device information
Fig. 88: Menu Device information
15.3 Service information
Service information
Fig. 89: Menu Service information
15.4 Overview of the SSM/SBM relay
status
84
Diagnostics and measured values
1
WICD = Wilo Communication ID (Communication address of the twin-head pump
partner)
There are functions for diagnosis and maintenance of electronics and interfaces in the
menu "Diagnostics and measured values", "Diagnostics help".
The following table provides an overview of the "Diagnostics help" menu:
Universal Display text
2.1 Diagnostics help
2.1.1 Device information
2.1.2 Service information
2.1.3 Overview of relay output (SSM/SBM)
2.1.4 Overview of analogue input (AI1)
2.1.5 Overview of analogue input (AI2)
2.1.6 Twin-head pump
connection info
2.1.7 Pump cycling status
In the "Diagnostics and measured values" menu
product names, the product and serial number as well as software and hardware ver-
sion. To do this, select the following:
Universal Display text
2.0 Diagnostics and measured values
2.1 Diagnostics help
2.1.1 Device information
In the "Diagnostics and measured values" menu
product for service purposes. To do this, select the following:
Universal Display text
2.0 Diagnostics and measured values
2.1 Diagnostics help
2.1.2 Service information
You can read the status information on the SSM/SBM relay in the menu
and measured values". To do this, select the following:
, you can call up information about
, you can call up information on the
"Diagnosis
WILO SE 2022-05