Installation; Personnel Qualifications; Operator Responsibilities - Wilo Yonos GIGA2.0-I Installation And Operating Instructions Manual

6

Installation

6.1

Personnel qualifications

6.2

Operator responsibilities

Installation and operating instructions Wilo-Yonos GIGA2.0-I/-D
Installation
The pump must be transported using approved lifting gear (hoist, block and tackle,
etc.). The lifting gear must be attached to the transport lugs at the motor flange. Slide
the lifting loops under the adapter plate, if necessary (Fig. 6/7). Secure the pump
against tipping.
WARNING
Damaged transport lugs can break off and cause considerable personal
injury.
• Check the transport lugs before use for damage and secure fixation.
NOTICE
To improve the weight distribution, the transport lugs can be swivelled/rotated ac-
cording to the lifting direction.
To do so, loosen and then re-tighten the fastening screws!
DANGER
Risk of fatal injury from falling parts!
The pump itself and pump parts can be extremely heavy. Falling parts pose a risk of
cuts, crush injuries, bruises or impacts, which can be fatal.
• Always use suitable lifting equipment and secure parts against falling.
• Never stand underneath a suspended load.
• During storage and transport, as well as before all installation and assembly work,
ensure that the pump is in a safe position and standing securely.
WARNING
Personal injury due to unsecured installation of the pump!
The base with the threaded holes is used for fixation only. When standing freely, the
pump might not be sufficiently stable.
• Never place the pump unsecured on the pump support feet.
CAUTION
Improper lifting of the pump by the electronic module can cause damage
to the pump.
• Never lift the pump by the electronic module.
ƒ
Installation/dismantling work: The installation/dismantling must be carried out by a
qualified technician who is trained in the use of the necessary tools and fixation
materials.
ƒ
Observe national and regional regulations!
ƒ
Observe locally applicable accident prevention and safety regulations of profes-
sional and trade associations.
ƒ
Provide protective equipment and ensure that the protective equipment is worn by
personnel.
ƒ
Observe all regulations for working with heavy loads.
en
19