Transport And Interim Storage; Installation And Electrical Connection - Wilo -Isar BOOST5 Installation And Operating Instructions Manual

en
5

Transport and interim storage

6 Installation and electrical con-
nection
14
System deactivated
• System powered and pump running.
• LED operating in circular mode.
• System status LED flashing green.
System error/alarm
• The system is powered and not in operation.
• Operating LEDs off.
• System status LED solid red.
When receiving the product, check that it has not been damaged during transport. If any
damage is found, take all necessary measures with the carrier in the time provided.
CAUTION
Risk of material damage
If the equipment delivered is to be installed at a later date, store it in a
dry place and protect it from impacts and any external influences (hu-
midity, frost etc.). Temperature range for transport and storage: -10 °C
to +60 °C.
Handle the product with care so as not to damage it prior to installation.
All installation and electrical connection work must be carried out solely by authorised
and qualified personnel, in accordance with applicable regulations.
WARNING
Physical injuries
The applicable regulations for the prevention of accidents must be com-
plied with.
WARNING
Risk of electric shock
Hazards from electric current must be prevented.
Installation and operating instructions • Wilo-Isar BOOST5 • Ed.03/12/2022