Lightspeed Redcat User Manual page 4

Important Safety Instructions
To avoid potential equipment damage and/or serious injury, READ AND FOLLOW
all safety precautions when installing the TOPCAT. WARNINGS are included
throughout the procedural steps in this guide, and are repeated below for
emphasis.
• USE A LICENSED ELECTRICIAN FOR POWER CONNECTIONS. The TOPCAT
system uses standard 100 – 240VAC power. Obtain the services of a licensed
electrician when supplying and connecting power to the ceiling enclosure. BE
SURE electrical installation complies with local building codes. Improperly
installing and/or connecting power to the system may result in EQUIPMENT
DAMAGE, serious INJURY and/or DEATH.
• DO NOT INSTALL ALONE. The ceiling enclosure weighs approximately 20 lbs
(9 kg), and requires at least two people to install. DO NOT install alone.
• USE SUITABLE LADDERS. use proper ladders or support platforms when
installing the TOPCAT enclosure. DO NOT stand on chairs, tables, or other
unsuitable surfaces.
• SUPPORT THE CEILING ENCLOSURE PROPERLY. DO NOT allow the full
weight of the ceiling enclosure to rest on the tile grid of the ceiling. The ceiling
enclosure is designed to be suspended at TWO POINTS by suspension wires
(secured to rafters or other suitable building structure) and to rest LIGHTLY on
the tile grid.
4
(cont.)
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure, that may be sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.