Set-Up & Use / Operation; Determine Set-Up Location - Lightspeed Redcat User Manual

SET-UP & USE / OPERATION

Determine Set-Up Location

The Redcat is shipped with feet to stand on a cabinet or tabletop.
Alternatively, the fee can be used as wall mount brackets.
TABLETOP (RECOMMENDED)
• Virtually no setup time
• Greater flexibility to move to different locations
A. TABLE-TOP SET-UP
First, consider that the Redcat should be placed within 7 feet of an
electrical outlet and on a surface about 6 feet off the ground.
Next, find a location as far away as possible from the teacher who will
be using the mic.
• The best place is against the wall opposite where the teacher will
be speaking.
• If this is not possible, other good locations are along either wall
next to the teacher or in a corner.
• Avoid placing the Redcat next to where the teacher instructs.
Putting the Redcat in close proximity to the teacher's mic can
result in feedback.
11
WALL-MOUNT
• More permanent setup
• Greater security
AVOID!
GOOD PLACEMENT
BEST PLACEMENT